SuperGlass™ Diamond Fast Dry is a two component acrylic polyurethane system formulated to provide a resilient and attractive gloss finish in a range of commercial and industrial applications.
When tested for weather and chemical exposure, SuperGlass™ Diamond Fast Dry equals or exceeds the performance of similar urethane products. SuperGlass™ Diamond Fast Dry will adhere to a variety of substrates including fiberglass, ferrous metal, properly prepared non ferrous metals, and several types of plastic and specifically designed for application to high gloss surfaces such as porcelain bath tubs, ceramic tile and appliances where a high gloss film is desired.
Rapid cure, resistance to chemical and abrasion, and exceptional gloss retention are notable feature of the SuperGlass™ Diamond Fast Dry polyurethane. SuperGlass™ Diamond Fast Dry is approve by the U.S Department of Agriculture for use on structural surfaces or surfaces where there is a possibility of incidental food contact in official establishments.
Refinisher’s Warehouse SuperGlass™ Fast Dry is the same as the SuperGlass™ Diamond except that it dries in 24 hours, rather than the standard 48 hours. Same mixing ratio, same activator, same thinner. The SuperGlass™ Diamond Fast Dry is just a quicker 24 hour product allowing you to offer your customers “Next Day” use.
Available in Quarts and Gallons, and we also customize colors.
Surface must be clean, dry and free of oil, grease and other contaminates. Cleaning methods include use of Refinisher’s Warehouse Dissolve-X cleaner, Industrial Power Cleaner (IPC), Prep Solvent and Silicone Wash. Surface should be lightly sanded with wet or dry sand paper prior to application of coating
Mix 3 parts of SuperGlass™ Diamond Fast Dry with 1 part of SuperGlass™ Diamond Activador thin with SuperGlass™ Thinner up to 30%. Mix the three components thoroughly for five minutes prior to use.
Use conventional or airless spray for application. Brush or rollers is not recommended.